Voyager Digimatic

With the Voyager Digimatic the user can align the dish with the satellite desired manually in just a few quick and simple steps.  Currently the biggest difficulty in manually aligning the dish with a satellite broadcasting digital TV signals is the fact that there is a delay before the digital signals are displayed on LCD TV screens, and so the user is forced to carry out the alignment witha  very slow movement in order to avoid the risk of going past the required satellite without realising it.

Voyager Digimatic is the solution to this problem.  It is equipped with an electronic elevation meter that sends a reading to the display of the actual absolute value of the inclination of the dish, even if the vehicle is not level.  The DSF90E/HD that is included indicated (directly) both the elevation and the strength of the signal.  This makes it possible to quickly align this manual dish system with the desired satellite without the disadvantage of delayed signals.

 

What's Included

  • Satellite antenna complete with fold down mast and connection cables
  • Universal LNB
  • DSF90E/HD digital satellite finder
  • Parabolic Dish
  • A detailed instruction manual

DSF90E/HD

With Voyager Digimatic the user can align the dish manually with the Satellite desired in just a few quick and simple steps.  Currently, the biggest difficulty is manually aligning a dish with a satellite broadcasting digital TV signals is the fact that there is a delay before the digital signals are displayed on LCD TV screens, and so the user is forced to carry out the alignment with a very slow movement in order to avoid the risk of going past the required Satellite without realising it.

 

Voyager Digimatic is the solution to this problem.  It is equipped with an electronic elevation meter that sends a reading to the display of the actual absolute value of the inclination of the dish, even if the vehicle is not level. The DSF90E/HD that is included indicates (directly) both the elevation and the strength of the signal.  This makes it possible to quickly align this manual dish system with the desired Satellite without the disadvantage of delayed signals.

 

 

Step 1

Select the Satellite for the alignment (eg. ASTRA 23)

 

 

Step 2

Raise the dish until the correct elevation is indicated (see the elevation map)

 

 

Step 3

Turn the dish SOUTHWARDS until the DSF90E/HD emits a continuous "BEEP" sound.

 

 

Step 4

Wait for the SAT OK LED to illuminate

 

 

Step 5

If the alignment has been made to the wrong Satellite, the SAT NOT OK LED will illuminate and the dish mut be rotated again until the "BEEP" sound is heard again the teh SAT OK LED illuminates

 

 

Step 6

When the maximum number of LEDs are illuminated on the LEVEL indicator, the dish has been properly aligned.

 

 

Long Mast 52cm

Voyager Digimatic 50:

with Dish Size 49 x 45.5 cm

Voyager Digimatic 65:

with Dish Size 72 x 67 cm

Voyager Digimatic 85:

with Dish Size 91 x 85 cm

Short Mast 33cm

Voyager SM Digimatic 50:

with Dish Size 49 x 45.5cm

Voyager SM Digimatic 65:

with Dish Size 72 x 67cm

Voyager SM Digimatic 85:

with Dish Size 91 x 85cm

Print | Sitemap
© Scan-Terieur Ltd